Garmin Flight Deck 100 Marine Instruments User Manual


 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
265
FLIGHT MANAGEMENT
5.7 VERTICAL NAVIGATION
NOTE: The system supports vertical navigation for all lateral leg types except for CA, CI, FA, FM, HA, HM, PI,
VA, VD, VI, VR, and VM. Vertical constraints are not retained in stored flight plans.
The Vertical Navigation (VNV) feature provides vertical profile guidance during the enroute and teminal phases
of flight. Guidance based on specified altitudes at waypoints in the active flight plan or to a direct-to waypoint is
provided. It includes vertical path guidance to a descending path, which is provided as a linear deviation from the
desired path. The desired path is defined by a line joining two waypoints with specified altitudes or as a vertical
angle from a specified waypoint/altitude. The vertical waypoints are integrated into the active flight plan. Both
manual and autopilot-coupled guidance are supported with a Garmin autopilot.
Figure 5-89 Enabling/Disabling Vertical Navigation
CNCL VNV Softkey
Current Vertical Navigation Profile
Disabled (fields dashed)
ENBL VNV Softkey
Current Vertical Navigation Profile
Enabled (valid data)
Enabling VNV guidance:
1) Press the FPL Key to display the Active Flight Plan Page on the MFD.
2) Select the ENBL VNV Softkey; or press the MENU Key, highlight ‘Enable VNV’, and press the ENT Key. Vertical
navigation is enabled, and vertical guidance begins with the waypoint shown in the CURRENT VNV PROFILE box
(defaults first waypoint in the active flight plan with an altitude enabled for vertical navigation (e.g., HABUK)).