Garmin Flight Deck 100 Marine Instruments User Manual


  Open as PDF
of 688
 
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
190-00728-04 Rev. A
438
HAZARD AVOIDANCE
OPERATION
NOTE: The traffic system automatically changes modes based on certain flight parameters. Refer to the
TCAS II unit’s documentation information on automatic mode selection.
TodisplayTCASIITrafc,thesystemmustbeinTAONLYorTA/RAMode.Thesemodescanbeaccessed
onthePFDorontheTrafcMapPageoftheMFD.
Switching from standby mode to TA only or TA/RA mode:
On the MFD:
1) Turn the large
FMS
Knob to select the Map Page Group.
2) Turn the small
FMS
Knob
to select the Traffic Map Page.
3) Select the TA ONLY or TA/RA Softkey
Or:
1) Press the MENU Key and turn the small
FMS
knob
to select ‘TA Only Mode’ or ‘TA/RA Mode’.
2) Press the ENT Key. The unit switches from Standby Mode to TA Only or TA/RA Mode as necessary.
On the PFD:
1) Press the XPDR/TFC Softkey.
2) Press the MODE Softkey.
3) Press the TA ONLY or TA/RA Softkey to select an operating mode.
Switching from TA ONLY or TA/RA mode to Standby Mode:
On the MFD:
1) Turn the large
FMS
Knob to select the Map Page Group.
2) Turn the small
FMS
Knob
to select the Traffic Map Page.
3) Select the TFC STBY Softkey
Or:
1) Press the MENU Key and turn the small
FMS
knob
to select ‘Traffic Standby Mode’.
2) Press the ENT Key.
 previous next