Garmin Flight Deck 100 Marine Instruments User Manual


 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
481
AUTOMATIC FLIGHT CONTROL SYSTEM
DEPARTURE
Climbing to the Selected Altitude and flying an assigned heading:
1) Before takeoff:
a) Use the ALT SEL Knob to set the Selected Altitude to 12,000 feet.
b) Push the TO/GA Switch to activate Takeoff Mode. The flight director Command Bars establish a pitch up
attitude to follow.
c) Press the
AP
Key to engage the autopilot in a climb, holding the pitch angle commanded in Takeoff Mode and
wings level.
2) In this example, Vertical Speed Mode is used to capture the Selected Altitude (Pitch Hold, Vertical Speed, or
Flight Level Change Mode may be used).
a) Press the VS Key to activate Vertical Speed and Roll Hold modes and arm Selected Altitude Capture Mode.
The Vertical Speed Reference may be adjusted after Vertical Speed Mode is selected using the UP/DN Wheel or
pushing the CWS Button while hand-flying the aircraft to establish a new Vertical Speed Reference.
3) Use the
HDG SEL
Knob to set the Selected Heading, complying with ATC vectors to intercept Airway V4.
Press the HDG Key to activate Heading Select Mode while the autopilot is engaged in the climb. The autopilot
follows the Selected Heading Bug on the HSI and turns the aircraft to the desired heading.