Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
190-00728-04 Rev. A
426
HAZARD AVOIDANCE
altitUDe DisPlay
ThePilotcanselectthevolumeofairspaceinwhichnon-threatandproximitytrafcisdisplayed.TAs
occurring outside of these limits will always be shown.
Changing the altitude range:
1) On the Traffic Map Page, select the
ALT MODE
Softkey.
2) Select one of the following Softkeys:
• ABOVE: Displays non-threat and proximity traffic from 9000 feet above the aircraft to 2700 feet below the
aircraft. Typically used during climb phase of flight.
• NORMAL: Displays non-threat and proximity traffic from 2700 feet above the aircraft to 2700 feet below
the aircraft. Typically used during enroute phase of flight.
• BELOW: Displays non-threat and proximity traffic from 2700 feet above the aircraft to 9000 feet below the
aircraft. Typically used during descent phase of flight.
• UNREST (unrestricted): All traffic is displayed from 9900 feet above and 9900 feet below the aircraft.
3) To return to the Traffic Page, select the BACK Softkey.
Or:
1) Press the MENU Key.
2) Turn the small
FMS
Knob
to select one of the following (see softkey description in step 2 above):
• ABOVE
• NORMAL
• BELOW
• UNRESTRICTED
3) Select the ENT Softkey.
flight iD DisPlay
TheFlightIDsofotheraircraft(whenavailable)candisplayedontheTrafcMapPage(Figure6-118).
WhenaightIDisreceived,itwillappearaboveorbelowthecorrespondingtrafcsymbolontheTrafc
MapPagewhenthisoptionisenabled.
