Garmin Flight Deck 100 Marine Instruments User Manual


  Open as PDF
of 688
 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
149
AUDIO PANEL AND CNS
DME TUNING
NOTE: When turning on the system for use, the system remembers the last frequency used for DME tuning
and the NAV1
,
NAV2,
or
HOLD
state prior to shutdown.
TheDMEtransceiveristunedbyselectingNAV1,NAV2,orHOLDintheADF/DMETuningWindow.
Figure 4-33 DME Tuning Window
DME
Modes
ThefollowingDMEtransceiverpairingscanbeselected:
•NAV1–PairstheDMEfrequencyfromtheselectedNAV1frequency.
•NAV2–PairstheDMEfrequencyfromtheselectedNAV2frequency.
•HOLD – Whenin the HOLDposition, the DMEfrequency remains paired with the lastselected NAV
frequency.
Selecting DME transceiver pairing:
1) Select the ADF/DME Softkey to display the ADF/DME Tuning Window.
2) Turn the small
FMS
Knob to select the DME tuning mode.
3) Press the
ENT
Key to complete the selection.
Pressing the CLR Key or FMS Knob while in the process of DMEpairingcancelsthedataentryandreverts
backtothepreviouslyselectedDMEtuningstate.PressingtheFMS Knob activates/deactivates the cursor in
theADF/DMETuningWindow.
 previous next