Garmin Flight Deck 100 Marine Instruments User Manual


 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
28
SYSTEM OVERVIEW
REVERSIONARY MODE
NOTE: The system alerts the pilot when backup paths are utilized by the LRUs. Refer to the Appendices for
further information regarding system-specific alerts.
Reversionary mode is a mode of operation in which all important flight information is presented identically
on at least one of the remaining displays (see Figure 1-21). Transition to reversionary mode should be
straightforward for the pilot, for flight parameters are presented in the same format as in normal mode.
Figure 1-21 Reversionary Mode
Reversionary mode is activated by pressing the dedicated
DISPLAY BACKUP
button at the bottom of the
audio panel (see Figure 1-22 and refer to the Audio Panel section for further details). Pressing this button again
deactivates reversionary mode.
Figure 1-22 DISPLAY BACKUP Button
Pressing the DISPLAY
BACKUP button activates/
deactivates reversionary
mode for both the on-side
PFD and the MFD.
Each display can be configured to operate in reversionary mode, as follows:
•
PFD1
– By pressing the
DISPLAY BACKUP
button on the left audio panel.
•
MFD
– By pressing the
DISPLAY BACKUP
button on the left or the right audio panel.
•
PFD2
– By pressing the
DISPLAY BACKUP
button on the right audio panel.