190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
593
ADDITIONAL FEATURES
Sending a transmission manually:
NOTE
: Manual transmission of data can only be performed while the aircraft is on the ground.
1) While viewing the Report Status Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to move the cursor to the SEND button on the desired data report.
3) Press the ENT Key.
Sending all unsent data:
1) While viewing the Report Status Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to move the cursor to the SEND button on the desired data report.
3) Press the ENT Key. The Send Report window is displayed as shown in Figure 8-116.
4) Turn the large FMS Knob to highlight the ‘SELECT DATA TO SEND’ field.
5) Turn the small FMS Knob to select ‘ALL UNSENT DATA’.
6) Press the ENT Key.
Figure 8-116 Select Data to Send