Garmin Flight Deck 100 Marine Instruments User Manual


  Open as PDF
of 688
 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
441
HAZARD AVOIDANCE
Or:
1) Press the MENU Key.
2) Turn the small
FMS
Knob
to select one of the following (see softkey description in step 4 above):
• ABOVE
• NORMAL
• BELOW
• UNRESTRICTED
3) Select the ENT Softkey.
traffic maP Page DisPlay range
ThedisplayrangeontheTrafcMapPagecanbechangedatanytime.Maprangeisadjustablewiththe
RANGE Knobfrom2to40nm,asindicatedbythemaprangerings.
Changing the display range on the Traffic Map Page:
1) Turn the RANGE Knob.
2) The following range options are available:
• 2 nm
• 2 and 6 nm
• 6 and 12 nm
• 12 and 24 nm
• 24 and 40 nm
ADDITIONAL TRAFFIC DISPLAYS
TrafcinformationcanbedisplayedonthefollowingmapsontheMFDwhentheunitisoperating:
•NavigationMapPage
•TrafcMapPage
•TripPlanningPage
•NearestPages
•ActiveFlightPlanPage
TrafcinformationcanalsobedisplayedonthePFDwhentheSyntheticVisionSystem(SVS)optionis
installedandenabled.SeetheAdditionalFeaturesSectionfordetails.
Displaying traffic information (MFD maps other than the Traffic Map Page):
1) Select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map.
WhentrafcisselectedonmapsotherthantheTrafcMapPage,atrafciconisshowntoindicatetrafc
isenabledfordisplay(Figure6-127).
 previous next