Garmin Flight Deck 100 Marine Instruments User Manual


  Open as PDF
of 688
 
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
190-00728-04 Rev. A
428
HAZARD AVOIDANCE
traffic maP Page DisPlay range
ThedisplayrangeontheTrafcMapPagecanbechangedatanytime.Maprangeisadjustablewiththe
RANGE Knobfrom2to40nm,asindicatedbythemaprangerings.
Changing the display range on the Traffic Map Page:
1) Turn the RANGE Knob.
2) The following range options are available:
• 2 nm
• 2 and 6 nm
• 6 and 12 nm
• 12 and 24 nm
• 24 and 40 nm
ADDITIONAL TRAFFIC DISPLAYS
TrafcinformationcanbedisplayedonthefollowingmapsontheMFDwhentheunitisoperating:
•NavigationMapPage
•TrafcMapPage
•TripPlanningPage
•NearestPages
•ActiveFlightPlanPage
•SystemPages
TrafcinformationcanalsobedisplayedonthePFDwhentheSyntheticVisionSystem(SVS)optionis
installedandenabled.SeetheAdditionalFeaturesSectionfordetails.
Displaying traffic information (MFD maps other than the Traffic Map Page):
1) Select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map.
WhentrafcisselectedonmapsotherthantheTrafcMapPage,atrafciconisshowntoindicatetrafc
isenabledfordisplay(Figure6-120).
Displaying traffic on the Navigation Map
1) Ensure the traffic system is operating. With the Navigation Map displayed, select the
MAP
Softkey.
2) Select the
TRAFFIC
Softkey. Traffic is now displayed on the map as shown in the figure.
 previous next