Filter
Top Products
Vector Chart material · 143
How to use Cell Status window to initiate SENC conversion
Cell Status window can be used to force a new conversion into the SENC format for any chart cell, which is already
in the SENC format. Normally you do not need this feature, but it could be useful if for example somebody try to
analyse why an update cannot be converted etc.
Use Create Senc to initiate SENC conversion of
the base cell.
If the base cell is already converted in the SENC
format then the system ask you this question.
Select OK to overwrite the existing SENC.
If following S57 Error window appears, a permit
for the Chart is another edition.
Then the content of Cell Status window changes
as in this example.
Note that the SENC row is now empty.
After the SENC conversion is completed, the
content of the Cell Status changes as in this
example.
Note that the last update number for SENC row
is now 0 to indicate that only the base cell is
included into the SENC.
Now use Add Update to include an update in the
SENC.