Filter
Top Products
Conning Display · 409
Rate of Turn information
In this window user can monitor actual R.O.T, which is displayed as numerical
information in an upper box and below this box same value is shown with
direction by horizontal bar. Indication CALC is displayed if R.O.T. is
calculated by the System. See also Chapter "Navigation Sensors".
Heading information
:
There is shown following information in this window
1. Gyro course, both in numerical and in graphical format Source of heading
is indicated as text (mag) for magnetic compass, (corr) for corrected
heading value in ECDIS, (1) for Gyro 1, (2) for Gyro 2.
2. Diamond figure shows heading in graphical format
See also Chapter "Navigation Sensors".
Speed information
:
In this window there is shown following information
1. Bow speed
2. Longitudinal speed
3. Stern speed
4. Source of speed indicator (BOTTOM in example) . If source of speed is
last plausible speed (LAST), then all speed values are in red colour.
5. Direction of true wind relative to own ship. NOTE, this indication is
available, when RELATIVE WIND mode is selected to be displayed.
See also Chapter "Navigation Sensors".
Rudder information
In a Rudder window there is shown following information
1. First rudder and source of the first rudder. In this example the source is
actual rudder (ACT).
2. Second rudder and source of the second rudder. In this example the source
is ordered rudder (ORD).
In this example only one rudder connected.