160 · Raster Chart material
How to remove chart permits
Normally you do not need to remove permits during normal operation. Sometimes however it may be necessary to
remove chart permits from the system.
To remove chart permit, proceed as follows:
1.
2.
3.
4.
1. From the Control Panel press Chart Plan push button.
2. Select Permit Management command from the menu.
3. Press Select All button and them press Remove button. If you want to remove individual Permit, use cursor and
SELECT button to highlight it in list of Permits
4. Check that selected permits has been removed. Close window, press CANCEL in ECDIS Control Panel.