Filter
Top Products
Raster Chart material · 165
Loading updates by Active group
Loading updates by active group is used when you want to update only ARCS charts which you have designed to
include to defined group. This is very useful if your licence includes lot of charts all around a world and you are
going to use only a part of charts to which you have permit. You just define a group from charts you need for
voyage and update them into the system. To update by active group, proceed as followed:
1. Define a group, if does not exist. For more information, see chapter "Group of ARCS charts" on page 170.
2. Set group as an Active group. To set group as Active group, see "How to select active group" on page 173.
3. Press CHART PLAN push button, select Update from the menu and by
Active group from the sub menu.
4. An ARCS Update dialog box appears, which indicates active group
5. Insert Update CD-ROM to CD-ROM drive and press Load.
Loading updates manual
You can also load updates for ARCS charts manual. To load chart updates manual, proceed as follows:
1. Insert Update ARCS CD-ROM into CD-ROM drive.
2. Press CHART PLAN push button, select Update from the menu and
manual from the sub menu.
3. A Chart Operations dialog box appears, select desired chart from list box.
To load updates into the system press Load Update button. To close this
dialog box press OK button.
Note! If you want to use another CD-ROM drive connected in your network, use Chart Operations window to
select another CD-ROM drive.