Filter
Top Products
Reference Targets · 301
Associated alarms
Reference Targets have following associated alarms:
"1102 RefTgt: Less than 8 Targ", if you try to start Reference targets with a file with less than 8 targets.
"1101 RefTgt: No file selected", if you try to start Reference targets without any selected file
"2351 RefTgt: Forced to cancel", if you select a new Reference target file without cancel the current file. The
system cancel then automatically the current file.
"2352 RefTgt: Lost positions", you have selected Reference targets as positions source and the Reference target
system is unable to solve own ship positions.
"2352 RefTgt: Lost gyro corr", you have selected Reference targets as gyro correction source and the Reference
target system is unable to solve gyro correction.
"2352 RefTgt: Tracking full", if you try to select Reference targets in use and there are less than 8 tracking
channels available.
Backup to floppy
This procedure can be used to make backups of Reference Targets file or to carry Reference Targets file to other
planning or navigation station. For more information, see "Backup to floppy" on page 315.
Restore from floppy
This procedure can be used to read backup copies of any Reference Target file if some data is lost during Reference
Target modifying. The other usage is to read Pilot data files originating from other planning or navigation station.
For more information, see "Restore from floppy" on page 315.
Move to planning or navigation station
For more information, see "Move to planning or navigation station" on page 315.
Read from planning or navigation station
For more information, see "Read from planning or navigation station" on page 316.
How to load Reference Targets in the old Vector
system format
For more information, see "How to load chart and route files in the old Vector system format" on page 316.
How to save Reference Targets in the old Vector
system format
For more information, see "How to save chart and route files in the old Vector system format" on page 316.