222 · Chart Alarms
Figures above show before and after Chart Alarm calculation in Route Planning mode.
If there are alarms included to planned route, you have two alternatives to check them.
1. Check alarms leg by leg
2. Check alarms by using category of alarm
How to find Chart Alarms leg by leg
After you have done Chart Alarm calculation, the system is able to show you legs where dangerous areas are located.
All the alarms for each leg where alarms occur are shown in a list box of Alarms. The list of alarms is based on
selections in Chart Alarm parameters. To find Chart Alarms for route, proceed as follow:
1. In ChartAlarms sheet select in list box a leg.
2. In an Alarm list box there are displayed all the alarms in this leg.
Press Locate button, the system will display selected leg on Electronic Chart Area.