Filter
Top Products
400 · Parameters setup
Ship max. height:
Max. height of ship for generating alarms for objects which are hanging above sea level.
Ship draught:
Max. draught of ship for generating alarms for objects which are below sea level.
Gyro error correction:
Used to select method of gyro error correction.
Gyro spd/lat error:
Used to select speeds/latitude correction method of gyro error correction.
Max gyro error correction:
This is the limit for the maximum correction allowed. Typical value 3 degrees.
Manual gyro correction:
Used to adjust gyro correction manually.
Route parameters:
Max Rate of Turn:
Indicates the maximum rate of turn of the ship.
Turn end tolerance:
This defines the window for the detection of the end of turn. Typical values are between 2 to 4 degrees.
WP approach alarm time:
Used to set the alarm time before approaching the wheel over point.
WP prewarn alarm time:
Used to set the alarm time well before approaching the wheel over point.
Route start limit angle:
Used to set the maximum approach angle against planned course in order to accept start of automatic Route Steering.
Default line radius:
Used to define the default value of radius between waypoints during automatic Route Steering.
Drift compensation:
Enables/disables the drift compensation during automatic Route Steering.
Gyro error compensation:
Enables/disables the gyro error compensation of set course during automatic Route Steering.