Filter
Top Products
Raster Chart material · 185
.
Past tracks,
Predictor ship,
Events & Positions,
ARPA targets,
Reference targets
and Radaroverlay
are non-chart
information. All the
selected items are
shown on top of
chart data.
“Tracking” sheet
Past Tracks
· Ship System, if selected as Std or Other, own ship track is displayed based on the position used by the system
· Ship Primary, if selected as Std or Other, own ship track is displayed based on the primary position sensor
· Ship Secondary, if selected as Std or Other, own ship track is displayed based on the secondary position
sensor.
· ARPA targets, if selected as Std or Other, ARPA target past tracks are displayed.
Predictor ship, if selected as Std or Other, predicted own ship position is displayed with 5 own ship symbols.
Predictor time can be selected from 30 seconds to 180 seconds.
Note: The Predictor is visible only, if the own ship true scale symbol is also displayed.
Events marks (These marks are based on Voyage log records, for more information, see chapter "Voyage log".
· User Events, if selected as Std or Other, event symbol is displayed on ECDIS where system has recorded an
event based on conditions you have set (Type: User and Auto).
· Automatic Events, if selected as Std or Other, event symbol is displayed on ECDIS where system has
recorded an event based on conditions you have set. (Type: Ship and Alarm)
· Positions, if selected as Std or Other, Positions are displayed. (Type: Posdev.)
Note MOB event is always visible.
You can select period of time to be displayed in a list box of Show.
Radaroverlay, if selected as Std or Other, Radar Echo Overlay is displayed.
Note! Radar overlay has its own mode control. Radar echo overlay can be visible only if the selected mode
something else than ECDIS ONLY. For more information about radar echo overlay, see chapter "Radar Echo
Overlay".
ARPA targets, if selected as Std or Other, ARPA targets are displayed.
Control of AIS targets
· AIS targets, if selected as Std or Other, Symbol of AIS targets are displayed.
· AIS targets names, if selected as Std or Other, name for AIS targets are displayed.
· Max count, setting for maximum count of AIS targets to be displayed on ECDIS.
· Max. range, setting for maximum range of AIS targets from own ship to be displayed on ECDIS.