Filter
Top Products
Reference Targets · 295
How to select Reference Target for Plan mode
If text of Reference Target on Upper right hand corner is black it is indication that the Workstation is in monitoring
mode for Reference Target. To activate Plan mode and select Reference Target for Plan mode, proceed as
follows:
1.
2.
3.
4.
1. Press REFERENCE TARGET button and select Activate Plan mode> Goto Plan mode. (If you already have
desired Reference Target in Monitoring mode, you can use Activate Plan mode> Move Monitored for Plan
mode to select it for Plan mode and you can continue from step 4. NOTE, when using this command Reference
Target is removed from Monitor mode.).
2. Press REFERENCE TARGET push button and select from menu Select.
3. Reference Target list box appears to the dialog box area. Highlight desired Reference Target to select it.
4. Reference Target will be loaded to Plan mode and it is displayed on the Electronic chart area. For more
information about control Reference Target display, see Chapter "Details of chart display".