Filter
Top Products
78 · Vector Chart material
Conversion from ENC to SENC fails partly
If conversion fails partly due to internal booking error of
the chart.
Load the chart and updates again into the system.
ENC to SENC conversion fails or detects errors
If the SENC conversions detect
anything abnormal you get following
message window:
See more information in chapter
"S57 SENC Conversion details" on
page 80.
A new edition of the chart has been published and you miss it
If you tried to load updates for a
chart for which you do not have new
enough base cell or reissue in your
hard disk, you will get following
message:
The message above clearly indicate that this chart is not up-to-date and thus it does not fulfil SOLAS
requirements. Get immediately from the publisher of this chart the new edition of the chart.
You do not have all the published updates
If you tried to load updates and you
miss one or more updates between
updates already loaded into your hard
disk and updates that you are
loading, then you get following
message:
The message above indicates that you tried to load updates number 3, 4 and 5 when at least update 2 and possibly
update 1 were not available in your hard disk. Check the content of your CD-ROMs to find the missing
update/updates or contact your chart supplier.
The message above clearly indicate that this chart is not up-to-date and thus it does not fulfil SOLAS
requirements. Get immediately from the publisher of this chart the missing updates of the chart.
Unsafe Chart has been cancelled by the publisher
If you load an update, which contain
cancellation of the chart instruction
by the publisher of it, you get
following message:
Normally you should accept the cancellation and you should press Yes. Then the system automatically removes the
chart from the hard disk and from your chart screen.