Filter
Top Products
36 · Control Panel
Operative push buttons
SELECT
Used in window dialog to push soft keys, tick boxes etc. It is also used to insert WPs, User
Chart objects etc. when corresponding sheet is open in a Dialog box area.
OK/ENTER
It is used in window dialog to select OK or ENTER option.
SELECT NEXT
If dialog box has two or more sheets, SELECT NEXT is used to open next sheet.
CANCEL
It is used to close window dialog on display. To get Chart legend to be displayed, press
CANCEL in the Control Panel until panel appears with Chart Number as top item.
Direct function push buttons
STANDARD DISPLAY
It is used to make displayed object selection as defined by IMO performance standard.
CHART ALIGN
User can move own ship over chart to new position. It is used to align chart correctly if used
position method does not give accurate position. Moves also waypoints etc. to a new position if
corresponding window is open in dialog box area.
ZOOM OUT
This is used to change the scale of displayed chart. The scales of chart have defined by system.
Pushing once the zoom out pushbutton you get next smaller scale of chart on display (e.g.
before ZOOM OUT scale was 1:10000 and after ZOOM OUT it is 1:20000). The scale of
chart is indicated as fraction in lower statusbar.