Furuno fea2100 Marine GPS System User Manual


 
ECDIS Screen · 31
7.
Radar
The source of radar video overlay.
8.
Predictor
Set time of displayed predictor in seconds
9. Orientation of displayed chart and Presentation mode of own ship . Available modes are:
· North Up TM (True Motion)
· North Up RM (Relative Motion)
· Course Up TM (True Motion)
· Course Up RM (Relative Motion)
· Head Up RM (Relative Motion)
· Route Up RM (Relative Motion)
10 Presentation mode of speed vectors (own ship and ARPA targets) and set time. Available
modes are:
· True vectors, TrueVect
· Relative vectors, RelVect
11. Trails of radar video overlay. Available modes are:
· When selected true trails of radar echoes, TrueTrails
· When selected relative trails of radar echoes, RelTrails
12. Indication of displayed chart material:
· When there is no indication, then official ENC chart is displayed.
· When ARCS chart is displayed on ECDIS, RCDS (Raster Chart Display System mode).
· When displayed chart is from unofficial vector chart material, NON ENC.
· When Radar video overlay is displayed on top of chart, Radar Over Chart.
· When only Radar video overlay is displayed, Radar Video Only.
13. Indication of automatic TM reset of own ship if it is set off:
· TM Reset Off
· Ship off screen
14. Indication of selected scale of displayed chart referred to the original scale of chart.
With ARCS following are available:
· Displayed Chart is in smaller scale than original paper chart, Underscale
· Displayed Chart is in larger scale than original paper chart, Overscale
With S57 (ENC)
· If selected scale of chart is larger than compilation scale of chart, it is indicated as X nn
(for example "X10.7" or "X2.0")