Filter
Top Products
410 · Conning Display
Position information
This is called Position window. The following information is displayed:
· LAT and LON of own ship position
· Source of own ship position, see also Chapter "Navigation Sensors".
· Datum of own ship position. See Chapter "How to select Datum".
· Local Date and time. Current date and time used in the ECDIS.
Drift and radius information
This is called Drift and Radius window. Following information is displayed in
this window:
· SET RADIUS.; current set radius on Track Pilot.
· ACT RADIUS; current radius of turn.
· HDG; current heading
· DRIFT; direction and angle of drift.
· COG; Course Over Ground and source of it.
Track Pilot information
This is called Track Pilot window. Following information is displayed in this
window:
· SET R.O.T.; current set rate of turn based on current speed and set turning
radius.
· SET COURSE; current set course.
· MODE; indicates selected steering mode
· PLAN SPEED; planned speed in current leg of the monitored route.
· ACKN WARNING; steering related alarms displayed in lower Status bar
of ECDIS are also displayed in Conning Display.
This is called Track Pilot Extended window, where following additional
information available:
· SET RADIUS; indicates selected radius for turn.
· PROG CRS; course after turn designed by Program Course Change or
Program Track steering mode.
· SET HDG; calculated heading for vessel based on SET COURSE and
Drift. This information available when Program Track steering mode is in
use..