Filter
Top Products
162 · Raster Chart material
Load by active group
Loading by active group is used when you want to load only ARCS charts which you have designed to include to
defined group. This is very useful if your licence includes lot of charts all around the world and you are going to use
only a part of charts to which you have permit. You just define a group from charts you need for voyage and load
them into the system. To load by active group, proceed as followed:
1. Define a group, if does not exist. For more information, see chapter "Group of ARCS charts"
on page 170.
2. Set group as an Active group. To set group as Active group, "How to select active group" on
page 173.
3. Press CHART PLAN push button, select Load from the menu and by
Active group from the sub menu.
4. An ARCS Load dialog box appears, which indicates active group and
desired ARCS CD-ROMs
5. Insert desired CD-ROM to CD-ROM drive and press Load.
6. Repeat step 5 until you have loaded all the CD-ROMs involved the active
group, after you have load all the CD-ROMs, press Cancel to close ARCS
Load dialog box.