Filter
Top Products
Route planning · 249
Backup to floppy
This procedure can be used to make backups of routes or to carry routes to other planning or navigation station. For
more information, see "Backup to floppy" on page 315.
Restore from floppy
This procedure can be used to read backup copies of any route if some data is lost during Route Planning operations.
The other usage is to read routes originating from other planning or navigation station. For more information, see
"Restore from floppy" on page 315.
Move to planning or navigation station
For more information, see "Move to planning or navigation station" on page 315.
Read from planning or navigation station
For more information, see "Read from planning or navigation station" on page 316.
WP table report
This report is generated when you select Report from the menu and system opens Text View application
automatically to view generated report. It is possible to print the report as follow:
1. From File menu select Print.
2. Report will automatically to be printed to default printer.
To close Notepad select Exit from File menu.
WP report consists information of:
- position of waypoints
- planned speeds - estimated times of arrival (ETA)
- planned courses - planned fuel consumption
- distances between waypoints. Distance is not directly
calculated from LAT and LON values of WP's location,
but the distance is shorter distance compensated for
planned radius for each waypoint.
- total distance of route. Distance is not directly
calculated from LAT and LON values of WP's location,
but the distance is shorter distance compensated for
planned radius for each waypoint.