Filter
Top Products
Vector Chart material · 77
If you press Cancel button, you will
get following dialog box:
If you want to avoid very time consuming reload of charts which you already have, then you should select No (="No
for all" option in above window).
However if you want to reload charts, then select Yes (="Yes for all" option in above window).
Messages, which contain only notice
If you tried to load older chart data than you already have in your hard disk, you will get one of the following
messages:
This indicates that you already use a
newer edition of the chart.
This indicates that you already use a
newer reissue of the chart, which
includes this update
.
This indicates that you already use a
newer reissue of the chart
.
This indicates that you already use
these updates
.
NOTE! You can not replace chart data, which is already in use unless you only replace the latest base cell or update.
If you want to reload older data again, you must first remove the chart from your hard disk (See chapter "How to
remove S57 chart cells from the system").
Messages, which require careful attention
All messages in this chapter change the legal status of the charts in your system. Study these message extremely
careful because you may need to use paper charts to fulfil SOLAS requirements
Test before ENC to SENC conversion fails
CRC checksum is tested before the
SENC conversion and if it fails you
get this message