Filter
Top Products
Alarms · 419
List of alarms
List of Navigation alarms
Alarm number 1101: REFTGT: NO FILE SELECTED /7
------------------------------------
USE 'REFERENCE TARGET' BUTTON TO
SELECT VALID REFEFERENCE TARGET FILE
Alarm number 1102: REFTGT: NEED 8 TARGETS /7
------------------------------------
FILE MUST CONTAIN AT LEAST 8 TARGETS
IN ORDER TO UTILIZE REFERENCE
TARGETS USE 'REFERENCE TARGET'
BUTTON TO SELECT ANOTHER REF. TARGET
Alarm number 1200: DEPTH BELOW LIMIT /5/13
------------------------------------
ECHO SOUNDER INDICATES WATER DEPTH
BELOW TRANSDUCER TO EXCEED SPECIFIED
SAFE LIMIT.
Alarm number 2000: FILTER: POSITION UNRELIABLE /1
------------------------------------
ECDIS IS NOT ABLE TO ESTIMATE A
RELIABLE POSITION. VERIFY AND SELECT
SPEED AND POSITION SENSORS THROUGH
'SENSORS’ FUNCTION .
Alarm number 2001: NO SPEED AVAILABLE /1/8
------------------------------------
NO VALID SPEED SENSOR HAS BEEN FOUND.
VERIFY AND SELECT SPEED SEN SORS IN
'SENSORS' BUTTON
Alarm number 2002: NO HEADING AVAILABLE /1/8
------------------------------------
NO VALID HEADING SENSOR HAS BEEN
FOUND. VERIFY AND SELECT HEADING
SENSORS IN 'SENSORS’ FUNCTION.
Alarm number 2004: GYRO DATA UNRELIABLE /1/8
------------------------------------
IF YOU HAVE BOTH GYRO1 AND GYRO2
SELECTED AND IF THEY VALUE DIFFERS
MORE THAN 5 DEGREES ALARM IS
GENERATED. VERIFY AND SELECT HEADING
SENSORS IN 'SENSORS’ FUNCTION.
Alarm number 2005: LOG DATA UNRELIABLE /1/8
------------------------------------
LOG GIVES 0 KN SPEED, WHICH DOES NOT
CORRESPOND WITH OTHER SPEED SENSORS.
VERIFY AND SELECT SPEED SENSORS IN
'SENSORS’ FUNCTION.
Alarm number 2006: ROUTE:COURSE JUMP POSSIBLE /1
------------------------------------
SYSTEM HAS AUTOMATICALLY CHANGED TO
DEAD RECKONING. IF YOU NOW SELECT
"ON" A POSITION SENSOR YOU MAY GET A
JUMP FOR COURSE. CHANGE FROM ROUTE
STEERING TO MANUAL STEERING OR CHECK
POSITION VERY CAREFULLY BEFORE
SELECTING "ON".