Filter
Top Products
268 · User chart control
Select datum
Selection of datum is very important, if you manually enter latitude-longitude positions from the control panel or
keyboard or if you use digitizer. If you only operate with cursor to add and to modify waypoint locations, then you
could use any datum, although it is recommended to use native datum of the chart. For more information to select
datum, see chapter "Datum".
How to select User Chart for Monitor mode
User Chart which is selected for Monitor mode is displayed on Upper status bar in field of User Chart. If text of
User Chart on Upper right hand corner is red it is an indication that the Workstation is currently Displaying the User
Chart for Plan mode. To activate Monitor mode and select User Chart for Monitor mode, proceed as follows:
1.
2.
3.
4.
1. Press USER CHART button and select Activate Monitor mode> Goto Monitor mode. (If you already have
desired User Chart in Plan mode, you can use Activate Monitor mode> Move Planned for Monitor mode to
select it for Monitor mode and you can continue from step 4).
2. Press User Chart push button and select from menu Select.
3. User Chart list box appears to the dialog box area. Highlight desired User chart to select it.
4. User Chart will be loaded to System use and it is displayed on the Electronic chart area. For more information
about control User chart display, see Chapter "Details of chart display".