Filter
Top Products
32 · ECDIS Screen
15. Indication of availability of charts:
· If TM reset is active, then indication is from own ship position
· If automatic TM reset is set off, then indication is from current cursor location
With ARCS following indications are used:
· If larger scale ARCS are available, Larger RNC
· If same scale ARCS available, Eq RNC
· If larger compilation scale ENC available, Larger ENC
· If same compilation scale ENC available, Eq ENC
· If smaller compilation scale ENC available, Smaller ENC
With S57(ENC) following indication is used
· If larger compilation scale ENC available, Larger scale data exists
Lower Status bar
Find below description of Information available on Lower Status bar:
The data displayed in lower statusbar includes the following listed from left to right:
Field Description
UTC time
Co-ordinated Universal Time. The UTC time indicates time on Greenwich Meridian.
Local time zone
User can select local time zone to be displayed in this field.
Mode of Workstation
Mode of Workstation is indicated with text MULTI, SINGLE, PLAN or SLAVE.
Scale
Scale of displayed chart is shown in this field.
Software release
Current software release is shown here. Upper value is software release of the ECDIS
chart. Lower value is software release of the ECDIS navigation interface.
Alarms:
Alarms generated by the system (replace UTC time) and by the steering (replace local
time) is shown in lower status bar.
Find below a few examples of Lower Status bar:
Lower status bar in normal operation.
Lower status bar, when the system has generated an alarm.
Lower status bar, when the steering has generated an alarm.
Dialogbox area
Content of Dialogbox area is depending on status of ECDIS. This is the area where user can discuss with
application. If user has pressed a pushbutton of Control panel and chooses desired menu command from the menu
there will appear the corresponding dialog box in the Dialog box area.