Filter
Top Products
Navigation Sensors · 351
Ship parameters field:
Gyro error correction:
· Off: This selection disables any gyro error correction.
· Auto: This selection enables the automatic Gyro error correction based on Reference targets. This selection is
also a requirement to enable correction based on tabled speed/latitude.
· Manual: This selection enables the manual Gyro error correction in Manual gyro correction -field.
Gyro spd/lat error:
· This selects the automatic Gyro error compensation based on tabled speed/latitude correction. A requirement
for this selection is that Gyro error correction has been selected Auto.
Max gyro error correction:
· This is the limit for the maximum correction allowed. Typical value is 3 degrees.
Manual gyro correction:
· This is used to adjust gyro error manually. Note, that to enable this function you have to switch Gyro error
correction to Manual position.
Route parameters field:
Gyro error compensation:
· Used to select, if set courses in Route steering are corrected for gyro error.