Filter
Top Products
328 · Common Reference System
Mode of Workstations
The system is defined so that information and operations can be shared within Workstations. Sharing requires that
Access Server is running in the defined Workstation (this definition is an installation parameters, see the Technical
Manual). Access Server requires that the defined Workstation for it is selected as Multi workstation.
If something fails in Workstation(s) or in the LAN connecting the Workstations, which prevents Multi Workstation
operations, it is possible to switch the mode as Single workstation. If mode of the Workstation, which is defined in
Installation Parameters for Access Server, is set a Single workstation, the Access Server is stopped and the
Workstation(s) continues as if they would be separate individual ECDIS systems.
NOTE! When mode is Single workstation, no data harmonised nor information of user selection are shared between
Workstations.
How to change Mode to Single or Multi workstation
To change Sensor source, proceed as follows:
1. Operate at Workstation to which you like to set Mode. Press INITIAL SETTING button, in Workstation field
select tick box Mode and select Single or Multi workstation from the list box.
2. In this example mode was changed from Multi to Single.
Selection Single workstation disables selections of Usage Rights and Sensor source and stops Access Server
operations on Workstation. For indication of this lower left corner of display is text SINGLE with red text.