Filter
Top Products
308 · Pilot Data
How to select Pilot Data for Plan mode
If text of Pilot Data on Upper right hand corner is black it is indication that the Workstation is in Monitoring mode
for Pilot Data. To activate Plan mode and select Pilot Data for Plan mode, proceed as follows:
1.
2.
3.
4.
1. Press PILOT DATA button and select Activate Plan mode > Goto Plan mode. (If you already have desired
Pilot Data in Monitoring mode, you can use Activate Plan mode > Move Monitored for Plan mode to select
it for Plan mode and you can continue from step 4. NOTE, when using this command Pilot Data is removed
from Monitor mode.).
2. Press Pilot Data push button and select from menu Select.
3. Pilot Data list box appears to the dialog box area. Highlight desired Pilot Data to select it.
4. Pilot Data will be loaded to Plan mode and it is displayed on the Electronic chart area. For more information
about control Pilot Data display, see Chapter "Details of chart display".