Filter
Top Products
254 · Route monitoring
Route Monitor window when connected ARPA radar
is Selesmar. Note, that control for visibility of
monitored route is in this window.
Route Monitor window when connected ARPA radar is
Furuno of ARPA radar or ARPA radar which
communicate using IEC 61162-1 standard. Note, that
there is no control for visibility of monitored route in this
window.
How to select route to be monitored
To select route to be monitored, proceed as follows:
1. Press Route monitor push button and choose Select command from the menu. Select Route monitoring dialog
box appears.
2. In Route selection list box, highlight desired route and press Select to make selection.
Route field looks as this when route TOKYO has been selected as monitored route.
NOTE, when you select a Route for monitoring , a message shown below may appear It indicates that the
geometry of route is impossible to sail for a vessel. Select the Route for planning and make modifications
needed for it, for more information, see chapter "Geometry check of route" on page 246.