Filter
Top Products
426 · Alarms
Alarm number 4029: DGPS POS. SOURCE CHANGE /3/10
------------------------------------
DGPS POSITION SENSOR IN CHANNEL
NUMBER 3 HAS CHANGED ITS OPERATION
MODE FROM NORMAL TO DIFFERENTIAL OR
FROM DIFFERENTIAL TO NORMAL. CHECK
SENSORS AND IF REQUIRED SELECT MORE
SUITABLE POSITION SENSOR.
Alarm number 4030: DGPS POS. SOURCE CHANGE /3/10
------------------------------------
DGPS POSITION SENSOR IN CHANNEL
NUMBER 4 HAS CHANGED ITS OPERATION
MODE FROM NORMAL TO DIFFERENTIAL OR
FROM DIFFERENTIAL TO NORMAL. CHECK
SENSORS AND IF REQUIRED SELECT MORE
SUITABLE POSITION SENSOR.
Alarm number 4031: DGPS POS. SOURCE CHANGE /3/10
------------------------------------
DGPS POSITION SENSOR IN CHANNEL
NUMBER 5 HAS CHANGED ITS OPERATION
MODE FROM NORMAL TO DIFFERENTIAL OR
FROM DIFFERENTIAL TO NORMAL. CHECK
SENSORS AND IF REQUIRED SELECT MORE
SUITABLE POSITION SENSOR.
Alarm number 4033: ARPA RADAR SPD/CRS ERROR /3/10
------------------------------------
ARPA RADAR SELECTED AS SPD AND CRS
SOURCE IS NOT RECEIVED CORRECTLY
USE 'SENSORS' SPEED/COURSE TO SELECT
VALID SPD/CRS SENSORS
Alarm number 4034: SPEEDPILOT RECEIVE ERROR /3/10
------------------------------------
DATA FROM SPEEDPILOT IS NOT RECEIVED
CORRECTLY. CHECK CONNECTION OF
SPEEDPILOT.
Alarm number 4035: B-ADAPTER INTERFACE ERROR /1/8
------------------------------------
B-ADAPTER DATA IS NOT RECEIVED
CORRECTLY DUE TO INTERNAL SOFTWARE
ERROR IN COMMUNICATION PROGRAM.
TO RESTART COMMUNICATION PROGRAM,
OPEN INSTALLATION PARAMETERS OF
ECDIS AND PRESS OK WITHOUT CHANGING
ANY PARAMETERS. OR RESTART ECDIS.
Alarm number 4036: AMWSS COMM ERROR /6/13
------------------------------------
COMMUNICATION WITH AMWSS FAILS.
CHECK CONNECTION TO AMWSS
Alarm number 4037: AIS RECEIVE ERROR /6/13
------------------------------------
DATA FROM AMWSS IS NOT RECEIVED
CORRECTLY. CHECK CONNECTION TO
AMWSS
Alarm number 4038: DATUM MISMATCH /3/10
------------------------------------
POSITION SENSOR IN CHANNEL NUMBER 1
OUTPUTS POSITION ANOTHER DATUM AS
SET IN ECDIS INSTALLATION PARAMETERS
CHECK, THAT SENSOR OUTPUTS POSITION
IN WGS 84 DATUM.