Filter
Top Products
Up to six markers are available. Using the Marker Menu, you can set
the frequency of each one, you can set each one in the delta marker
mode, and you can set each marker’s level to maximum or minimum.
In some cases—such as in a production environment—limit lines are
desirable. Options within the menu called up using the Limits key, pro
-
vide for one or two flat, sloped, or single-point-segmented limit lines
for each channel. These limit lines function with all of the graph types,
including Smith and admittance. The color of the limit lines (blue) dif
-
fers from that of the measurement trace. This allows for easy analysis
of results.
The Hard Copy Menu key menu (Figure 8-1) gives you a choice be
-
tween a printer and a colored-pen plotter. It also lets you select menus
from which you may chose from a variety of print or plot options.To
output the display, press the Start Print key. The default setting pro
-
vides for a full display printout from the associated printer.
37xxxE OM 8-5
MEASUREMENTS TRANSMISSION AND REFLECTION
Figure 8-1. Output Menu
SELECT OUTPUT
DEVICE
PRINTER
PLOTTER
OUTPUT OPTIONS
SETUP OUTPUT
HEADERS
OPERATIONS
PRINT OPTIONS
PLOT OPTIONS
PRESS <ENTER>
TO SELECT