Filter
Top Products
37xxxE OM A-203
ALPHABETICAL LISTING S
MENU DESCRIPTION GPIB COMMAND
SELECT
PARAMETER
None
S21, FWD TRANS
b2/a1
Selects the S
21
parameter to be displayed on the active
channel
The parameter can be displayed in any of the available
formats.
S21
S11, USER 2
b2 / 1
Selects the S
11
parameter to be displayed on the active
channel.
The parameter can be displayed in any of the available
formats.
S11
S12, REV TRANS
b1/a2
Selects the S
12
parameter to be displayed on the active
channel.
The parameter can be displayed in any of the available
formats.
S12
S22, REV REFL
b2/a2
Selects the S
22
parameter to be displayed on the active
channel.
The parameter can be displayed in any of the available
formats.
S22
EXT ANALOG IN Switches from a S-parameter or user-defined parameter
to an external analog input. This is measured from the
rear panel Ext Anlg In connector input. The values may
be seen on the Real graph type where 1 Unit=1Volt.
EANAIN
PRESS <ENTER>
TO SELECT
Pressing the Enter key implements your menu selection. None
PRESS <1>
TO REDEFINE
SELECTED PARAMETER
Calls menu PD1, which lets you redefine the selected
parameter.
None
Menu SP, Select S Parameter