Filter
Top Products
37xxxE OM A-133
ALPHABETICAL LISTING L
MENU DESCRIPTION GPIB COMMAND
SINGLE LIMITS None
–LINEAR MAG– None
UPPER LIMIT ON (OFF)
XXX.XXX pU
Turns the Upper Limit line on or off for the active channel.
For your convenience, the arbitrarily set limit lines allow
you to delineate a go/no go line on your Linear Mag display
beyond which the measured values are unacceptable.
UPL0; UPL1;
UPLX?
LOWER LIMIT ON(OFF)
XXX.XXX pU
Turns the Lower Limit line on or off for the active channel
on your Linear Mag display.
LOL0; LOL1;
LOLX?
READOUT LIMIT Calls menu LF4, which shows points where the current
S-parameter intercepts the lower limit.
None
-PHASE- None
UPPER LIMIT ON (OFF)
XXX.XXX °
Turns the Upper Limit line on or off for the active channel.
For your convenience, the arbitrarily set limit lines allow
you to delineate a go/no go line on your polar display
beyond which the measured values are unacceptable.
UPL0; UPL1;
UPLX?
LOWER LIMIT ON(OFF)
XXX.XXX °
Turns the Lower Limit line on or off for the active channel
on your Phase display.
LOL0; LOL1;
LOLX?
READOUT LIMIT Calls menu LF2, which shows points where the current
S-parameter intercepts the lower limit.
None
DISPLAY ON (OFF)
LIMITS
Enables both previously set limit lines to appear for the
active
channel on your Phase display.
LON; LOF; LON?
TEST LIMITS Calls menu LTST, which provides choices for testing the
limits.
None
SEGMENTED LIMITS Calls a menu in the LS series (LSX), which lets you set
segmented limit lines.
None
PRESS <ENTER>
TO SELECT
OR TURN ON/OFF
Pressing the Enter key implements your menu selection. None
Menu L9, Set Limits—Linear Magnitude and Phase