Filter
Top Products
37xxxE OM A-13
ALPHABETICAL LISTING A
MENU DESCRIPTION GPIB COMMAND
AUTOCAL SETUP None
LINE TYPE
COAXIAL/WAVEGUIDE
Switch between the line type used with the AutoCal
module.
LTC; LTW; LTX?
WAVEGUIDE CUTOFF
XX.XXXXXX GHz
Enter the Waveguide Cutoff frequency if the Waveguide
Line Type is selected.
WCO; WCO?
SWITCH AVERAGING
XXXX
Enter an appropriate amount of SWITCH AVERAGING
(recommend 4 for the electronic modules, and 16 for the
electromechanical modules).
ACSW; ACSW?
NUMBER OF AVGS None
REFLECTION
XXXX
Enter the number of averages to be used with the reflection
standards in the AutoCal module (default 10 averages).
ACRFL; ACRFL?
LOAD
XXXX
Enter the number of averages to be used with the load
standard in the AutoCal module (default 10 averages).
ACLO; ACLO?
THRU
XXXX
Enter the number of averages to be used with the thru
standard (default 4 averages).
ACTU; ACTU?
ISOLATION
XXXX
Enter the number of averages to be used with the isolation
standard in the AutoCal module (default 32 averages).
ACISO; ACISO?;
ACIAF?; ACIAX?
AUTOCAL TYPES
S11 1 PORT
S22 1 PORT
FULL 2 PORT
ADAPTER REMOVAL
Select the type of AutoCal calibration to perform.
Calls menu ACAL_S11, for more setup.
Calls menu ACAL_S22, for more setup.
Calls menu ACAL_FULL, for more setup.
Calls menu ACAL_AR, for more setup.
ACS11; ACX?
ACS22; ACX?
ACSF2P; ACX?
ACADR; ACX?
Menu ACAL_SETUP, AutoCal Setup Menu