Filter
Top Products
Step 5.
Selecting USER DEFINED RECEIVER MODE in
menu RCV1 brings menu RCV 2 to the screen. When
menu RCV 2 appears, the last mode selected is high
-
lighted in red. The default selection is SOURCE
LOCK.
Source Lock, Tracking or Set-On modes can be se
-
lected from this menu. When a mode is selected, in
-
formation about that mode is displayed on the
screen. This information describes the mode and the
capabilities required of the RF source.
37xxxE OM 8-61
MEASUREMENTS RECEIVER MODE
MENU RCV1
RECEIVER MODE
STANDARD
USER DEFINED
SOURCE CONFIG
SPUR REDUCTION
NORMAL/OFF
PRESS <ENTER>
TO SELECT
MENU RCV2
USER DEFINED
RECEIVER MODE
SOURCE LOCK
TRACKING
SET ON
PRESS ENTER
TO SELECT
MENU RCV4
USER DEFINED
RECEIVER MODE
WARNING:
CONTINUING
MAY INVALIDATE
CURRENT
SETUP AND
CALIBRATION
PRESS <ENTER>
TO CONTINUE
PRESS <CLEAR>
TO ABORT