Filter
Top Products
A-208 37xxxE OM
S ALPHABETICAL LISTING
MENU DESCRIPTION GPIB COMMAND
SET SCALING
OR PRESS
<AUTOSCALE>
None
–LINEAR POLAR– None
RESOLUTION
XX.XXX U/DIV
Sets the resolution for the vertical axis of the active
channel’s displayed graph. Resolution can by set
incrementally using the keypad or rotary knob. The center
is fixed at 0 units; therefore, changing the resolution also
changes the reference value and vice versa
SCL; SCL?;
SCL2; SCL2?
REFERENCE VALUE
XXX.XXX U
Sets the value at the reference line for the active channel
amplitude measurement on the displayed graph. The value
can be set in increments of 0.001 U using the keypad or
rotary knob.
OFF; OFF?
OFF2; OFF2?
FIXED
REFERENCE LINE
Sets the reference line for the active channel’s amplitude
measurement. This is the line about which the amplitude
expands with different resolution values. The reference line
can be set to any vertical division using the rotary knob.
REF; REF?;
REF2; REF2?
SELECT POLAR
CHART MODE
MAGNITUDE
PHASE
Calls menu PC1, which lets you define the phase angles
between which your polar chart will display data.
None
PRESS <ENTER>
TO SELECT
AND RESUME CAL
Pressing the Enter key implements your menu selection
and resumes the calibration from where it left off, if in the
calibration mode.
None
Menu SS2 or CAL_SS2, Set Scaling 2