Filter
Top Products
37xxxE OM A-73
ALPHABETICAL LISTING C
MENU DESCRIPTION GPIB COMMAND
APPLY
CALIBRATION
None
FULL 12-TERM
(S11, S21
S22, S12)
Reflects the type of calibration presently stored in internal
memory.
APPLY ON (OFF)
CALIBRATION
Turns calibration on or off. CON; COF;
CON?
TUNE MODE ON (OFF) For applied Full 12-Term calibration only. When turned off,
the ratio of forward to reverse sweeps is set to the normal
1:1.When turned on, you can set the ratio of forward
sweeps to reverse sweep from 1:1 to 10,000:1 (below).
None
NO. OF FWD (REV)
SWEEPS BETWEEN
REV (FWD) SWEEPS
XXXXX SWEEPS
(XXXXX REMAINING)
Lets you enter a value for the number of forward (or
reverse) sweeps. Alternatively, this option displays the
number of forward sweep (or reverse) remaining before a
reverse sweep will occur.
None
PRESS <APPLY CAL>
TO TURN ON/OFF
Press the Apply Cal key to apply the stored calibration. None
PRESS <ENTER>
TO TURN ON/OFF
Press the Enter key to turn selected mode on/off. None
Menu Cal_Applied