Filter
Top Products
A-222 37xxxE OM
S ALPHABETICAL LISTING
MENU DESCRIPTION GPIB COMMAND
SWEEP SETUP None
CENTER
XXX.XXXXXXXXX GHz
Enter the center frequency in GHz. CNTR; CNTR?
SPAN
XXX.XXXXXXXXX GHz
Enter the span frequency in GHz. SPAN; SPAN?
SET START/STOP Calls menu SU1, which lets you set values for start and
stop frequencies.
None
XXX DATA POINT(S)
XXX.XXXXXXXXX GHz
STEPSIZE
Displays the number of frequency points and the spacing
between points for the center and span frequencies
selected above. The number of points shown provides the
finest frequency resolution possible, based on your Data
Points key menu selection.
None
C.W. MODE ON (OFF)
XXX.XXXXXXXXX GHZ
Move cursor here and press Enter to enable the CW mode.
Enter CW frequency for measurements.
CWF; CWON;
SWP; CWON?
MARKER SWEEP Move cursor here and press Enter to set the start and stop
frequencies (menu SU5) of the CW frequency (menu SU6)
to the values of any marker.
None
DISCRETE FILL Calls the Discrete Fill menu (menu DF1). None
HOLD BUTTON
FUNCTION
Calls menu SU4, which lets you set the action of the HOLD
key.
None
TEST SIGNALS Calls menu SU2, which lets you set the source power and
the values for the attenuators in the 37xxxE. It also
provides entry into the Flat Test Port Power calibration.
None
PRESS <ENTER>
TO SELECT
OR TURN ON/OFF
Pressing the ENTER key implements your menu selection. None
Menu SU1_CENTER, Sweep Setup 1