Filter
Top Products
A-78 37xxxE OM
C ALPHABETICAL LISTING
MENU DESCRIPTION GPIB COMMAND
SELECT
DISPLAY MODE
None
SINGLE
CHANNEL
Selects a single channel for display. You select the type of
display in menu GT1 or GT2.
DSP; DSP?
DUAL
CHANNELS1&3
Selects Channels 1 and 3 for display. You select the type of
display in menu GT1 or GT2.
D13
OVERLAY DUAL
CHANNELS1&3
Lets you simultaneously view the Channel 1 data
superimposed over the Channel 3 data on a single display.
Channel 1 trace displays in red and Channel 3 in yellow.
T13
DUAL
CHANNELS2&4
Selects Channels 2 and 4 for display. You select the type of
display in menu GT1 or GT2.
D24
OVERLAY DUAL
CHANNELS2&4
Lets you simultaneously view the Channel 2 data
superimposed over the Channel 4 data on a single display.
Channel 2 trace displays in red and Channel 4 in yellow.
T24
ALL FOUR
CHANNELS
Selects all four channels for display. You select the type of
display in menu GT1 or GT2.
D14
PRESS <ENTER>
TO SELECT
Pressing the Enter key implements your menu selection.
The menu remains on the screen until another menu is
selected for display or until the CLEAR/RET LOC key is
pressed.
None
Menu CM, Select Display Mode