Filter
Top Products
37xxxE OM A-213
ALPHABETICAL LISTING S
MENU DESCRIPTION GPIB COMMAND
SET SCALING
OR PRESS
<AUTOSCALE>
None
–GROUP DELAY– None
RESOLUTION
XX.XXX fs/DIV
Sets the resolution for the vertical axis of the active
channel’s displayed graph. Resolution can by set
incrementally using the keypad or rotary knob.
SCL; SCL?;
SCL2; SCL2?
REF VALUE
XXX.XXX fs
Sets the value at the reference line for the active channel
amplitude measurement on the displayed graph. The value
can be set in increments of 0.0001 s using the keypad or
rotary knob.
OFF; OFF?
OFF2; OFF2?
REFERENCE LINE
X
Sets the reference line for the active channel’s amplitude
measurement. This is the line about which the amplitude
expands with different resolution values. The reference line
can be set to any vertical division using the rotary knob.
REF; REF?;
REF2; REF2?
APERTURE
X.X PERCENT
OF SWEEP
Sets and displays the percent of frequency span over
which group delay is calculated.
APR; APR?
PRESS <ENTER>
TO RESUME CAL
On the CAL_SS7 menu, pressing the Enter key returns you
to the calibration setup or sequence.
None
Menu SS7 or CAL_SS7, Set Scaling 7