Filter
Top Products
Chapter 1
General Information
1-1 SCOPE OF MANUAL This manual provides general information, installation, and operating
information for the Model 37xxxE Vector Network Analyzer (VNA)
system. (Throughout this manual, the terms VNA, 37xxxE VNA, and
37xxxE will be used interchangeably to refer to the system.)
1-2 INTRODUCTION This section provides general information about the 37xxxE VNA
system and one or more precision-component calibration or
performance verification kits. The section also provides a listing of
recommended test equipment.
1-3 IDENTIFICATION
NUMBER
All Anritsu instruments are assigned a unique six- or seven-digit ID
number, such as “940101.” This number is affixed to a decal on the
rear panel of each unit. In any correspondence with Anritsu Customer
Service, please use this number.
1-4 ONLINE MANUALS Manual updates, if any, are available on Anritsu's Internet download
page (http://www.us.anritsu.com/downloads/).
1-5 SYSTEM DESCRIPTION The 37xxxE Network Analyzer (Figure 1-1) is a single-instrument sys
-
tem that contains a built-in source, test set, and analyzer. It is pro
-
duced in two series— 372xxE and 373xxE—described below. All mod
-
els provide up to 1601 measurement data points, a built-in SD Card
for storing and recalling front panel setups and measurement and cali
-
bration data. They also provide an on-screen display of total opera
-
tional time and dates of system calibrations. They support operation
over the IEEE 488.2 General Purpose Interface Bus (GPIB).
GENERAL INFORMATION SCOPE OF MANUAL
1-3 37xxxE OM