Filter
Top Products
A-48 37xxxE OM
C ALPHABETICAL LISTING
MENU DESCRIPTION GPIB COMMAND
SELECT
TYPE OF LOAD
None
BROADBAND
FIXED LOAD
Selects calibration based on the broadband load being
used, then calls menu C6A.
BBL; BBX?
SLIDING LOAD
(MAY ALSO
REQUIRE
BROADBAND
FIXED LOAD)
Selects calibration based on the sliding load being used. If
your low-end frequency is below 2 GHz (4 GHz for V
Connector), a fixed broadband load is also required.
SLD; BBX?
PRESS <ENTER>
TO SELECT
Pressing the Enter key implements your menu selection. None
Menu C6, Select Load Type
MENU DESCRIPTION GPIB COMMAND
BROADBAND LOAD
PARAMETERS
None
IMPEDANCE
XX.XXX W
Enter the impedance of the load. BBZ; BBZ?
INDUCTANCE
XX.XXX pH
Enter the inductance of the load. BBZL; BBZL?
PRESS <ENTER>
WHEN COMPLETE
Pressing the Enter key implements your menu selection. None
Menu C6A, Enter Broadband Load Impedance
MENU DESCRIPTION GPIB COMMAND
TRM MATCH
PARAMETERS
None
IMPEDANCE
XX.XXX W
Allows entry of the impedance (defaults to 50.000 W). BBZ; BBZ?
INDUCTANCE
XX.XXX pH
Allows entry of the inductance (defaults to 0.00 pH). BBZL; BBZL?
PRESS <ENTER>
WHEN COMPLETE
Pressing the Enter key implements your menu selection. None
Menu C6B, Enter Broadband Load Impedance