Filter
Top Products
37xxxE OM A-105
ALPHABETICAL LISTING G
MENU DESCRIPTION GPIB COMMAND
SWEPT FREQUENCY
GAIN COMPRESSION
None
NOMINAL OFFSET
-XX.XX dB
Shows gain of nominal offset. This value is the approximate
gain (or loss) of the external devices preceding the AUT
(amplifier under test). Specifically, the gain of the amplifier
and attenuator combination. This value is used whenever
flat test port power is turned OFF (while still existing) to
prevent an unexpected jump in the power to the AUT.
NOFST?
CALIBRATE
FOR FLATNESS
(NO CAL EXISTS)
Calls menu GC_SU8, which provides calibration options. None
FLATNESS
CORRECTION
AT -XX.XX dBm
Shows value of the flatness correction. FPX?
CALIBRATE
RECEIVER
(NO CAL EXISTS)
Calls menu GC_RCVR, which provides calibration options. None
NORMALIZE S21
(NOT STORED)
Calls menu GC_NORM. None
GAIN COMPRESSION
POINT (0 dB REF)
XX.XX dB
This option is used with marker search functions. Value
has a range from 0.05 to 9.99 dB and a default value of
1.00 dB. The search value is [negative] the gain
compression point value. The reference is based on
(maximum) with tracking ON.
GCMP; GCMP?
TEST AUT Closes the extended menu and displays the dual channels
1 & 3, with channel 3 active.
None
EXIT APPLICATION Exits the gain compression application and returns to
S-parameter measurements. It restores the measurement
setup.
None
Menu GC1, Swept Frequency Gain Compression