Filter
Top Products
37xxxE OM A-55
ALPHABETICAL LISTING C
MENU DESCRIPTION GPIB COMMAND
PORT X
SHORT DEVICE
None
ENTER THE
INDUCTANCE
COEFFICIENTS
Provide inductance term entries for the short device such
that the frequency dependent inductance is L(w) = L0 + (L1
* f) + (L2 * f^2) + (L3 * f^3). These values default to zero.
They are used in the standard calibration method in
combination with the coaxial and microstrip line types.
They are not used in the offset short and LRL/LRM
calibration methods. The calibration kits provided by
ANRITSU are not to support these terms.
None
TERM1-L0
- XXXX.XX e-12
Enter the term 1 value. CL0; CL0?
TERM2-L1
- XXXX.XX e-24
Enter the term 2 value. CL1; CL1?
TERM3-L2
- XXXX.XX e-33
Enter the term 3 value. CL2; CL2?
TERM4-L3
- XXXX.XX e-42
Enter the term 4 value. CL3; CL3?
ENTER THE
OFFSET LENGTH
Enter the length of the offset device. COS
OFFSET LENGTH
-XXX.XXXX mm
Displays the offset length value. COS?
PRESS <ENTER>
WHEN COMPLETE
Pressing the Enter key implements your menu selection. None
Menu C12A_P1/C12A_P2, Enter the Offset Length