Filter
Top Products
37xxxE OM A-63
ALPHABETICAL LISTING C
MENU DESCRIPTION GPIB COMMAND
ENTER
MICROSTRIP
PARAMETERS
None
WIDTH OF
STRIP
XX.XXXX mm
Move the cursor to this line and enter the width of the
microstrip you are using.
USW; USW?
THICKNESS OF
SUBSTRATE
XXXX.XXXX mm
Move the cursor to this line and enter the thickness of the
substrate
you are using.
SBT; SBT?
Zc
XXX.XXX W
Move the cursor to this line and enter the characteristic
impedance of the microstrip.
USZ; USZ?
SUBSTRATE
DIELECTRIC
XX.XX
Move the cursor to this line and enter the relative dielectric
constant of the substrate you are using.
SBD; SBD?
EFFECTIVE
DIELECTRIC
XX.XX
(RECOMMENDED
1.00)
Move the cursor to this line and enter the effective
dielectric constant of the microstrip. A recommended value
will also be displayed.
USE; USE?
PRESS <ENTER>
WHEN COMPLETE
Pressing the Enter key implements your menu selection. None
Menu C16A, Enter Microstrip Parameters
MENU DESCRIPTION GPIB COMMAND
SELECT
MICROSTRIP
KIT TO USE
None
10 MIL KIT Selects parameters for 10 mil UTF kit. U10; UTFX?
15 MIL KIT Selects parameters for 15 mil UTF kit. U15; UTFX?
25 MIL KIT Selects parameters for 25 mil UTF kit. U25; UTFX?
USER DEFINED Calls menu C16A, which lets you modify the parameters. None
PRESS <ENTER>
TO SELECT
Pressing the Enter key implements your menu selection. None
Menu C16, Select Microstrip Parameters