Filter
Top Products
37xxxE OM A-65
ALPHABETICAL LISTING C
MENU DESCRIPTION GPIB COM
-
MAND
CHANGE LRL/LRM
PARAMETERS
None
NEXT CAL STEP Selects next calibration step. Must move cursor to here
after making below selections. Pressing the Enter key then
moves you to the next step. Calls menu C19.
None
CHARACTERIZE
CAL DEVICES
None
DEVICE 1
LINE 1 (REF)
X.XXXX mm
Enter length of line 1. LL1; LL1?
DEVICE 2
LINE /MATCH
X.XXXX mm/FULLBAND
Select device 2—LINE or MATCH; if line is selected, enter
length.
LL2; LM2;
LX2?
PRESS <ENTER>
TO SELECT
OR SWITCH
Press Enter to select. If DEVICE 2 is chosen, pressing the
Enter key toggles between LINE and MATCH.
None
Menu C18A, Change LRL/LRM Parameters