Filter
Top Products
A-210 37xxxE OM
S ALPHABETICAL LISTING
MENU DESCRIPTION GPIB COMMAND
SET SCALING
OR PRESS
<AUTOSCALE>
None
–LOG MAG– None
RESOLUTION
XX.XXX dB/DIV
Sets the resolution for the vertical axis of the active
channel’s displayed graph. Resolution can by set
incrementally using the keypad or rotary knob.
SCL; SCL?;
SCL2; SCL2?
REFERENCE VALUE
XXX.XXX dB
Sets the value at the reference line for the active channel
amplitude measurement on the displayed graph. The value
can be set in increments of 0.001 dB using the keypad or
rotary knob.
OFF; OFF?
OFF2; OFF2?
REFERENCE LINE
X
Sets the reference line for the active channel’s amplitude
measurement on the log-magnitude graph. This is the line
about which the amplitude expands with different resolution
values. The reference line can be set to any vertical
division using the rotary knob.
REF; REF?;
REF2; REF2?
PRESS <ENTER>
TO RESUME CAL
On the CAL_SS4 menu, pressing the Enter key returns you
to the calibration setup or sequence.
None
Menu SS4 or CAL_SS4, Set Scaling 4